-40%

Fender Telecaster 4-Way Switch Harness! CTS, Tritan, Switchcraft, & Orange Drop!

€ 28.2

Availability: 96 in stock
  • Bundle Listing: No
  • Color: Silver
  • Country/Region of Manufacture: United States
  • Condition: New
  • Type: Tele 4 way wiring harness
  • All returns accepted: ReturnsNotAccepted
  • Model: FT4way
  • Brand: SGS
  • MPN: Does Not Apply
  • Position: complete system
  • To Fit: Telecaster

    Description

    This gives you the usual Tele sounds in the first three positions. But in position 4, you get both pickups in series like a humbucker. It’s a big boost in output and a big, fat tone.
    But you need to make one important adjustment: The neck pickup’s cover has to be grounded with a separate wire. That means you have to flip the pickup over and cut the little un-insulated jumper wire that connects to the cover. That leaves a 1/4-inch nub of wire connected to the cover. Attach a new wire to that, and connect it to ground.
    This wiring works great with any vintage-output Tele pickups.
    STARR GUITAR SYSTEMS 4-Way replacement electronics for Fender Telecaster! Each set is assembled, hand wired and soldered in the USA by Dave Starr using premium parts. Upgrade your import telecaster electronics, or replace your old worn out parts with these premium replacement units! Simply attach your pickup wires, and bridge ground wire and you are ready to rock! All sets are signed by Dave Starr and have their own serial number. FREE SHIPPING IN THE USA!
    Included in each SGS Fender Telecaster "FT4way" set:
    2) Solid shaft CTS 250K Vintage Style Audio Pots, with Nut, Lock and Dress Washer.
    1) Tritan 4 way pickup selector switch
    1) "Orange Drop" .047 mfd 100 volt Capacitor
    4) Vintage style push back black (ground) and white (hot) cloth covered wires, 22 gauge, with a waxed braided cotton outer insulation.
    1) Switchcraft #11 input jack with shrink wrap strain relief on both terminals
    1) Wiring diagram
    (see photo section)
    1) Assembly template board
    Note: Check out my ebay store Telecaster section for more Tele models!!
    Note: Most guitars manufactured overseas in South Korea, Japan, China, Indonesia and Mexico use 6mm metric pots and have metric sized holes drilled. You will need to enlarge the pot holes to 3/8" to fit these CTS pots properly.
    Starr Guitar Systems
    PO Box 3132
    Conroe, Texas 77305
    WHO WE ARE:
    Starr Guitar Systems (SGS) owner Dave Starr has been playing guitar and bass professionally (WildeStarr, Vicious Rumors, and CHASTAIN) for over 30 years, and doing guitar repair for over 30 years as well. Dave has put his years of experience as a pro to come up with his own line of guitar & bass electronic upgrade systems. So, when you buy from Dave, you are not just buying gear from a guitar technician... you are buying gear from a PRO MUSICIAN who has been there and done that..... recorded over 15 albums, toured the world multiple times, MTV videos, artist endorsements (currently signed with ERNIE BALL strings and EMG pickups), etc. Every SGS unit comes with all of that experience behind it... what works and what doesn't, because Dave has pretty much seen and done it all. And, every SGS unit is custom built and assembled by hand one at a time by Dave here in his Houston Texas shop.