Pre-wired CTS 550k 10% short shaft POTS (NO caps) fits Gibson Les Paul Historic

Description

BEFORE
BIDDING
make sure to READ
all text below, look at all the pictures, and review
shipping costs and return polic
y. Thank
you!
"Vintage Relic pre-wired upgrade kit (NO caps) fits / compatible with
Gibson Les Paul
. New. Direct replacement for your vintage (pre-1977) or Historic R9 R8 R7 R6 R4 R0 1959 1958 1957 1956 1954 1960 reissue.
4 USA
CTS 500k 10% Tolerance short shaft (brass) audio taper pots (2 volume, 2 tone).
Top of the line CTS pots with tight tolerances and measuring ~550k.
We do measure all pots and use higher values for the volume positions.
You may request specific pot values and we will do our best to match those values; please provide this info at check ou
t.
No tone capacitors
; add your own (or check our other auctions). Wiring diagram included.
50's style wiring.
Vintage correct 20 AWG silver plated copper grounding wire between the pots
.
Please note:
this kit is designed for Gibson Les Paul vintage or Historic Reissue or vintage guitars that use
short
shaft pots. If your guitar requires
long
shaft pots (most all
non
-Historic Reissue Gibsons), see our other auctions. Also, CTS pots require a 3/8" hole (in the top of your guitar); most USA made guitars are drilled this way, however imported guitars often are not.
Distance between the components (center to center); if you need different spacing, let us know:
neck volume to neck tone = 2.25"
neck volume to bridge volume = 2.0"
bridge volume to bridge tone = 2.25"
bridge tone to neck tone = 2.0"
neck volume to bridge tone (diagonal) = 2.1"
"
Above text and pictures copyright Vintage Relic. All rights reserved.
POT SPECS:
Can Size = 15/16 in. radius X 3/8 in. height
Bushing Threads = 3/8-32
Bushing Height = 3/8 in.
Shaft Type - split
Shaft Diameter = .238 in (6.3mm)
Spline Count = 24 (NOT metric)
Shaft Length - 3/8 in.
Hole size requirement = 3/8 in.
Value = ~550K Ohms